Investigation of path loss prediction in different multi-floor stairwells at 900MHz and 1800MHz

Wireless communication along the stairwell in a high rise building is important to ensure immediate response to take place via consistent relaying of necessary information or data in emergency situations. Thus, a good understanding of signal wave attenuation along the stairwell is necessary to allow a better wireless network planning. This paper presents empirical path loss prediction model for multi-floor stairwell environment. The proposed model is based on measurement at 4 different stairwells, at 900MHz and 1800 MHz which are near public safety communication bands. The model incorporates the effect of different floor heights and unique path loss-to-distance relation on selected stair flights observed during measurement campaign. The proposed model demonstrates higher accuracy than 3 standard path loss models at 2 other stairwell

Propagation path loss modeling and coverage measurements in urban microcell in millimeter wave frequency bands

The global bandwidth deficiency facing wireless carriers has motivated the exploration of the underutilized millimeter wave (mm-wave) frequency spectrum for future broadband cellular communication networks, and mm Wave band is one of the promising candidates due to wide spectrum. This paper presents propagation path loss and outdoor coverage and link budget measurements for frequencies above 6 GHz (mm-wave bands) using directional horn antennas at the transmitter and omnidirectional antennas at the receiver. This work presents measurements showing the propagation time delay spread and path loss as a function of separation distance for different frequencies and antenna pointing angles for many types of real-world environments. The data presented here show that at 28 GHz, 38 GHz and 60 GHz, unobstructed Line of Site (LOS) channels obey free space propagation path loss while non-LOS (NLOS) channels have large multipath delay spreads and can utilize many different pointing angles to provide propagation links. At 60 GHz, there is more path loss and smaller delay spreads. Power delay profiles PDPs were measured at every individual pointing angle for each TX and RX location, and integrating each of the PDPs to obtain received power as a function of pointing angle. The result shows that the mean RMS delay spread varies between 7.2 ns and 74.4 ns for 60 GHz and 28 GHz respectively in NLOS scenario

Interference coordination for LTE-advanced and FM broadcasting interoperability

The surest way to guarantee that multiple wireless systems can concurrently exist harmlessly, when operating in the same or adjacent channel, is by analyzing spectrum overlapping. This paper proposes a more accurate model to evaluate the interference power from co-channel and adjacent channel of orthogonal frequency division multiplexing-based long term evolution-advanced (LTE-Advanced) towards broadcasting frequency modulation systems at 800 MHz. Power spectral density overlapping factor is employed, and closed form of the interference power loss is derived. Numerical results demonstrate that the proposed method evaluates more exact interference power than the advanced minimum coupling loss (A-MCL) method, where the co-channel and adjacent channel interference powers are reduced by 1.3 and 3 dB, correspondingly, compared to that obtained using the AMCL method. This decreases the minimum separation distance between the two systems, which can eventually lead to efficient radio spectrum resources utilization

Analysis of Electromagnetic Simulation Method for the Dielectric Lens Antenna

For the millimetre wave usage at 5G mobile communication system, a dielectric lens antenna will become a promising candidate for the base station antenna. In developing a dielectric lens antenna, antenna performance analysis by an electromagnetic simulator will be necessary. The structure of the proposed design is a hyperbolic dielectric lens antenna fed by a pyramidal horn at the operating frequency of 28GHz. In this paper, the abilities of a commercial electromagnetic simulator FEKO are investigated. Simulation methods of GO and MoM solvers are shown for electric field distributions on the antenna aperture and far field radiation patterns. The simulation results show that the optimum gain of lens antenna based on GO and MoM method are 26.68 dBi and 27.24 dBi, respectively. Moreover, multi beam radiation patterns and suitable feed positions are clarified for wide scanning angle. Good performance for multi beam application by using MoM is shown based on the off-focus characteristic where the antenna gain is only slightly reduced from 0.51 dBi to 4.03 dBi for 5.71° to 35.54°

Multiband split-ring resonator based planar inverted-F antenna for 5G applications

5G, the fifth generation of wireless communications, is focusing on multiple frequency bands, such as 6GHz, 10GHz, 15GHz, 28GHz, and 38GHz, to achieve high data rates up to 10 Gbps or more.The industry demands multiband antennas to cover these distant frequency bands, which is a task much more challenging. In this paper, we have designed a novel multiband split-ring resonator (SRR) based planar inverted-F antenna (PIFA) for 5G applications. It is composed of a PIFA, an inverted-L parasitic element, a rectangular shaped parasitic element, and a split-ring resonator (SRR) etched on the top plate of the PIFA.The basic PIFA structure resonates at 6GHz. An addition of a rectangular shaped parasitic element produces a resonance at 15GHz. The introduction of a split-ring resonator produces a band notch at 8GHz, and a resonance at 10GHz, while the insertion of an inverted-L shaped parasitic element further enhances the impedance bandwidth in the 10GHz band. The frequency bands covered, each with more than 1GHz impedance bandwidth, are 6GHz (5–7GHz), 10GHz (9–10.8GHz), and 15GHz (14-15GHz), expected for inclusion in next-generation wireless communications, that is, 5G. The design is simulated using Ansys Electromagnetic Suite 17 simulation software package.The simulated and the measured results are compared and analyzed which are generally in good agreement

Comparative studies of the rain attenuation predictions for tropical regions

The radio waves propagating through the earth atmosphere will be attenuated due to the presence of atmosphere particles, such as water vapor, water drops and the ice particles. Meanwhile, the atmospheric gases and rain will both absorb and scatter the radio waves, and consequently degrade the performance of the link. The results of various studies conducted in temperate and tropical regions have been published in research papers. This paper presents the summary of comparative studies on different rain attenuation prediction methods for terrestrial microwave links tropical regions. Basically the models described in this paper include those of the ITU-R, revised Moupfouma, revised Silva Mello and Lin model. The objective of this study is to reveal the most suitable rain attenuation prediction model for the Malaysian tropical region. This paper will provide useful information for microwave engineers and researchers in making decision over the choice of most suitable rain attenuation prediction for terrestrial links operating in a tropical region. Even though the ITU-R model underestimates the rain attenuation at higher frequencies, the test results have clearly indicated that it is most suitable for predicting terrestrial rain attenuation in tropical Malaysia, compared to others